SURE STEP
SOLUTIONS LLC
San Jose, CA
ph: 408.316.9977
fax: 408.360.9975
Email us
SOLUTIONS LLC
San Jose, CA
ph: 408.316.9977
fax: 408.360.9975
Email us
| "G" Product Series |
SURE STEP SOLUTIONS LLC
G Series coatings provide superior non-skid safety to a wide range of surfaces including steel,
wood, concrete.
They are durable, long-lasting, weather-resistant and chemical resistant. Uniquely, they meet
Military Specs for durability under extreme conditions and loads.
G Series products are available in a variety of colors, including OSHA Safety Colors, and they can
be custom blended to a specific color.
Applications are unlimited - from manufacturing plants, warehouse, commercial & industrial to
outdoor, trucking and marine surfaces.
This product conforms to all Regulatory Compliance levels and may qualify for the IRS Section 44
Tax Credits and Section 190 Tax Deductions.
G Series Products adhere to wood, concrete, metal, fiberglass, plastic, rubber & vinyl.
Manufactured in the US, the G Series was created for the military and as a result has a proven
track record and has gone through exhaustive testing.
G Series Products have superior slip resistance ratings. Under dry conditions they have more
traction than carpet and under wet or dynamic conditions most are rated at a COF of 1.0+.
The coatings are able to be cleaned using a spray & extract method. Auto-scrubbers also may be
used.
G-2216 TWO-PART HEAVY-DUTY EPOXY: G-2216 Non-Skid is a two-component, heavy-duty epoxy
non-skid coating containing a synthetic resinous binder system and abrasive particles. This system
can be used on steel, aluminum or concrete when a heavy-duty non-skid is required. This
product features excellent resistance to oils, grease, hydraulic fluids, detergent solutions, salt
water, alcohol, gasoline, and most acids. Because of its excellent resistance to wear and extreme
temperature changes, G-2216 Epoxy Non-Skid will provide years of service when properly applied.
This coating meets the performance requirement of US military specification MIL-D-23003SH (Type
III), MIL-D-24483A(S) and DOD-C-24667.
G-1191 ONE-PART WATER-BASED COATING: G-1191 Non-Skid is a lightweight, non-slip floor and
deck covering compound developed for use over aluminum, steel, wood, concrete or polyester
(fiberglass). This material is used on areas subject to foot traffic in confined spaces. It is long
wearing with a hard, non-porous surface and is resistant to extreme temperatures. G-1191
Non-Skid contains a synthetic, resinous binder and abrasive particles. Because it is water-based,
it is easy to apply, especially in areas where solvents are a problem. This coating meets the
performance requirement of US military specs MIL-D-23003SH (Type II).
G-501 TWO-PART LIGHT-WEIGHT EPOXY COATING: G-501 Epoxy Non-Skid is a lightweight, non-slip
deck covering compound developed for use on aluminum, steel, wood, concrete or polyester
(fiberglass). This two-part system meets all the requirements of US military specs MIL-D-23003
(Ships) Type H.
G-350 CHELATING COATING: A superior performance, corrosion resistant, flame resistant,
lightweight, labor saving, single coat coating for areas where Volatile Organic Content limitations
are of major consideration. This high performance coating developed for use in areas where
corrosion and fire resistance are major considerations. In addition, the G-350 Series Chelating
Coatings are flexible, abrasion resistant and, because of their lower dry film weight, well suited
for application in weight critical areas. G-350 reacts with top layer atoms of aluminum, iron, steel
and copper on which it is coated, incorporating them into the actual coating. It is extremely
resistant to fire and does not blister or peel when subjected to extreme heat. Also, bonds very
well to certain types of plastic composites and forms a superior moisture barrier, thus allowing a
longer exterior exposure time for those materials.
G-650 SELF-LEVELING EPOXY SEALER: Intended for use in a high performance floor system. The
coating provides a high gloss, seamless, hygienic surface that is both hard wearing and durable, it
can also be used to provide a non-skid surface.
G Series Pricing varies upon product, surface and size of application. Price starts at $6.00 per
square foot.
wood, concrete.
They are durable, long-lasting, weather-resistant and chemical resistant. Uniquely, they meet
Military Specs for durability under extreme conditions and loads.
G Series products are available in a variety of colors, including OSHA Safety Colors, and they can
be custom blended to a specific color.
Applications are unlimited - from manufacturing plants, warehouse, commercial & industrial to
outdoor, trucking and marine surfaces.
This product conforms to all Regulatory Compliance levels and may qualify for the IRS Section 44
Tax Credits and Section 190 Tax Deductions.
G Series Products adhere to wood, concrete, metal, fiberglass, plastic, rubber & vinyl.
Manufactured in the US, the G Series was created for the military and as a result has a proven
track record and has gone through exhaustive testing.
G Series Products have superior slip resistance ratings. Under dry conditions they have more
traction than carpet and under wet or dynamic conditions most are rated at a COF of 1.0+.
The coatings are able to be cleaned using a spray & extract method. Auto-scrubbers also may be
used.
G-2216 TWO-PART HEAVY-DUTY EPOXY: G-2216 Non-Skid is a two-component, heavy-duty epoxy
non-skid coating containing a synthetic resinous binder system and abrasive particles. This system
can be used on steel, aluminum or concrete when a heavy-duty non-skid is required. This
product features excellent resistance to oils, grease, hydraulic fluids, detergent solutions, salt
water, alcohol, gasoline, and most acids. Because of its excellent resistance to wear and extreme
temperature changes, G-2216 Epoxy Non-Skid will provide years of service when properly applied.
This coating meets the performance requirement of US military specification MIL-D-23003SH (Type
III), MIL-D-24483A(S) and DOD-C-24667.
G-1191 ONE-PART WATER-BASED COATING: G-1191 Non-Skid is a lightweight, non-slip floor and
deck covering compound developed for use over aluminum, steel, wood, concrete or polyester
(fiberglass). This material is used on areas subject to foot traffic in confined spaces. It is long
wearing with a hard, non-porous surface and is resistant to extreme temperatures. G-1191
Non-Skid contains a synthetic, resinous binder and abrasive particles. Because it is water-based,
it is easy to apply, especially in areas where solvents are a problem. This coating meets the
performance requirement of US military specs MIL-D-23003SH (Type II).
G-501 TWO-PART LIGHT-WEIGHT EPOXY COATING: G-501 Epoxy Non-Skid is a lightweight, non-slip
deck covering compound developed for use on aluminum, steel, wood, concrete or polyester
(fiberglass). This two-part system meets all the requirements of US military specs MIL-D-23003
(Ships) Type H.
G-350 CHELATING COATING: A superior performance, corrosion resistant, flame resistant,
lightweight, labor saving, single coat coating for areas where Volatile Organic Content limitations
are of major consideration. This high performance coating developed for use in areas where
corrosion and fire resistance are major considerations. In addition, the G-350 Series Chelating
Coatings are flexible, abrasion resistant and, because of their lower dry film weight, well suited
for application in weight critical areas. G-350 reacts with top layer atoms of aluminum, iron, steel
and copper on which it is coated, incorporating them into the actual coating. It is extremely
resistant to fire and does not blister or peel when subjected to extreme heat. Also, bonds very
well to certain types of plastic composites and forms a superior moisture barrier, thus allowing a
longer exterior exposure time for those materials.
G-650 SELF-LEVELING EPOXY SEALER: Intended for use in a high performance floor system. The
coating provides a high gloss, seamless, hygienic surface that is both hard wearing and durable, it
can also be used to provide a non-skid surface.
G Series Pricing varies upon product, surface and size of application. Price starts at $6.00 per
square foot.
| Slip Resistant Coating |
| Up-close Non-Skid Surface Photo, G Series in Medium Grey and OSHA Yellow: |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Contact: Carolyn @ 408.316.9977 |