SURE STEP
SOLUTIONS LLC
San Jose, CA
ph: 408.316.9977
fax: 408.360.9975
Email us
SOLUTIONS LLC
San Jose, CA
ph: 408.316.9977
fax: 408.360.9975
Email us
| UT Product Series |
SURE STEP SOLUTIONS LLC
UT Series coatings are a cross-linked acrylic urethane co-polymer, made for extreme weather, wear,
and impact resistance. Applications are unlimited -- from warehouse, commercial & industrial to
outdoor and marine surfaces.
UT Series was designed with safety in mind while still maintaining an attractive appearance. This
product conforms to all Regulatory Compliance levels and qualifies for the IRS Section 44 Tax Credits
and Section 190 Tax Deductions.
The UT Products will adhere to wood, concrete, metal, fiberglass, plastic, rubber & vinyl. They are
able to be a targeted product used in large areas or in very specific areas of concern determined by
the Federal ADA guidelines including:
#1910.231 -- "Steps with non-slip surfaces shall be provided."
#1910.236 -- "All walkways shall be maintained in a non-slip condition."
#1910.261 -- "All walkways shall have non-slip surfaces."
UT 100: UT 100 is a hard durable non-slip coating for heavy-duty use on concrete, aluminum, and
steel. It can be driven on with auto, truck, and forklift traffic. Ideal for heavy pedestrian use, it is
highly abrasion and wear resistant.
UT 100 SR: UT 100SR is a hard durable non-slip coating for heavy-duty use on concrete, aluminum,
and steel that contains a smaller aggregate particle than UT 100. It can be driven on with auto,
truck, and forklift traffic. Ideal for heavy pedestrian use, it is highly abrasion and wear resistant.
UT 100 F: UT 100F is very flexible and pliable. This coating looks identical to the UT-100, but is used
on wood and fiberglass, or wherever there is more movement and swelling. UT-100F resists cracking
on wooden decks, patios, boat docks, and fiberglass boat decks.
UT 100AQ: UT 100AQ can be applied to submerged surfaces, such as pools, wave pools, splash pads,
pool decks, ponds, etc. It cures to a firm and extremely durable rubberized surface, while keeping
the appearance of the other UT-100 coatings.
UT 50: UT 50 is made with 50% of the rubber aggregate removed. This product is designed for
commercial kitchens, restaurants, waterparks and other lighter use surfaces.
UT 25: UT 25 contains no rubber aggregate and is used as a floor sealant. This product is designed
for a variety of uses where floors need to be sealed for protection.
UG 100, UG 100SR, UG 100F, UG 100AQ, UG 50, UG 25: UG is a "glow in the dark" non-slip coating
designed for wood, concrete, steel and aluminum. Ultra Glow glows up to 4 hours.
Product Photo Sample:
UT is manufactured in the US and comes in a wide variety of colors, including the approved Safety
Yellow & Orange colors conforming to OSHA and other Regulations.
UT is a topical coating that is applied responsively to each situation. Coatings can be added from a
light and comfortable to the barefoot result up to an industrial, heavy machinery usage result.
Pricing varies upon surface and size of application. Price starts at $6 per square foot.
UT colors:
and impact resistance. Applications are unlimited -- from warehouse, commercial & industrial to
outdoor and marine surfaces.
UT Series was designed with safety in mind while still maintaining an attractive appearance. This
product conforms to all Regulatory Compliance levels and qualifies for the IRS Section 44 Tax Credits
and Section 190 Tax Deductions.
The UT Products will adhere to wood, concrete, metal, fiberglass, plastic, rubber & vinyl. They are
able to be a targeted product used in large areas or in very specific areas of concern determined by
the Federal ADA guidelines including:
#1910.231 -- "Steps with non-slip surfaces shall be provided."
#1910.236 -- "All walkways shall be maintained in a non-slip condition."
#1910.261 -- "All walkways shall have non-slip surfaces."
UT 100: UT 100 is a hard durable non-slip coating for heavy-duty use on concrete, aluminum, and
steel. It can be driven on with auto, truck, and forklift traffic. Ideal for heavy pedestrian use, it is
highly abrasion and wear resistant.
UT 100 SR: UT 100SR is a hard durable non-slip coating for heavy-duty use on concrete, aluminum,
and steel that contains a smaller aggregate particle than UT 100. It can be driven on with auto,
truck, and forklift traffic. Ideal for heavy pedestrian use, it is highly abrasion and wear resistant.
UT 100 F: UT 100F is very flexible and pliable. This coating looks identical to the UT-100, but is used
on wood and fiberglass, or wherever there is more movement and swelling. UT-100F resists cracking
on wooden decks, patios, boat docks, and fiberglass boat decks.
UT 100AQ: UT 100AQ can be applied to submerged surfaces, such as pools, wave pools, splash pads,
pool decks, ponds, etc. It cures to a firm and extremely durable rubberized surface, while keeping
the appearance of the other UT-100 coatings.
UT 50: UT 50 is made with 50% of the rubber aggregate removed. This product is designed for
commercial kitchens, restaurants, waterparks and other lighter use surfaces.
UT 25: UT 25 contains no rubber aggregate and is used as a floor sealant. This product is designed
for a variety of uses where floors need to be sealed for protection.
UG 100, UG 100SR, UG 100F, UG 100AQ, UG 50, UG 25: UG is a "glow in the dark" non-slip coating
designed for wood, concrete, steel and aluminum. Ultra Glow glows up to 4 hours.
Product Photo Sample:
UT is manufactured in the US and comes in a wide variety of colors, including the approved Safety
Yellow & Orange colors conforming to OSHA and other Regulations.
UT is a topical coating that is applied responsively to each situation. Coatings can be added from a
light and comfortable to the barefoot result up to an industrial, heavy machinery usage result.
Pricing varies upon surface and size of application. Price starts at $6 per square foot.
UT colors:
| Slip Resistant Coating |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Contact: Carolyn @ 408.316.9977 |